16.
Secure the tubes together with the nuts (1/4
inch) as shown in
17.
Insert the upper discharge tube through the tube
seal in the hood.
18.
Pull the upper tube out slightly so that the seal
extends outward and over the blower assembly
(
).
19.
Use both latches to attach the lower tube to the
blower assembly (
18
Adjusting the Parking
Brake
No Parts Required
Procedure
Check to ensure that the parking brake is adjusted
properly. Refer to your
Operator’s Manual
for the
correct procedure.
19
Checking the Tire Pressure
No Parts Required
Procedure
Increase the tire pressure due to the additional weight.
Note:
This is not applicable with semi-pneumatic
tires.
Check and increase the air pressure in the front caster
wheels and rear tires (
).
Air pressure in the rear tires: 138 kPa (20 psi)
Air pressure in the front caster wheels: 172 kPa
(25 psi)
g001055
Figure 34
23
