![Toro TITAN ZX 5400 Operator'S Manual Download Page 36](http://html1.mh-extra.com/html/toro/titan-zx-5400/titan-zx-5400_operators-manual_1132484036.webp)
Fuel System
Maintenance
Replacing the Fuel Filter
Service Interval:
Every 500 hours/Yearly (whichever
comes first) (more often under dusty,
dirty conditions).
1. Disengage the blade control switch (PTO), move the
motion control levers to the neutral lock position,
and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Allow the machine to cool down.
4. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
5. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 47).
G01 1395
1 2
3
Figure 47
1.
Fuel filter
3.
Fuel line
2.
Hose clamp
6. Remove the filter from the fuel lines.
7. Install a new filter and move the hose clamps close
to the filter (Figure 47).
8. Open the fuel shutoff valve.
Note:
It is important to reinstall the fuel line hoses and
secure with plastic ties the same as they were originally
installed at the factory to keep the fuel line away from
components that could cause fuel line damage.
Electrical System
Maintenance
Servicing the Battery
Service Interval:
Monthly
Warning
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
Battery electrolyte contains sulfuric acid which
is a deadly poison and causes severe burns.
Do not drink electrolyte and avoid contact with
skin, eyes or clothing. Wear safety glasses to
shield your eyes and rubber gloves to protect
your hands.
Removing the Battery
Battery terminals or metal tools could short
against metal machine components causing
sparks. Sparks can cause the battery gasses to
explode, resulting in personal injury.
•
When removing or installing the battery, do
not allow the battery terminals to touch any
metal parts of the machine.
•
Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
36
Summary of Contents for TITAN ZX 5400
Page 6: ...Slope Chart 6...
Page 10: ...115 9628 1 Fuel 2 Full 3 Half 4 Empty 10...