Toro TITAN 74891, Operator'S Manual

Page: 23 / 56

g024410
1
2
3
4
Figure 23
1. Deck-lift pedal 3. Height-of-cut positions
2. Handle 4. Pin
Adjusting the Anti-Scalp
Rollers
Whenever you change the height of cut, it is recommended to
adjust the height of the anti-scalp rollers.
1. Disengage the blade-control switch (PTO), move the
motion-control levers to the N
EUTRAL
-L
OCK
position,
and set the parking brake.
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the flange nut, anti-scalp roller, and bolt from
the bracket (
Figure 24 ).
Note:
Keep the bolt and anti-scalp roller together
when removing.
g024312
1
2 3 4
5
Figure 24
1. Flange nut 4. Bushing
2. Spacer 5. Bolt
3. Anti-scalp roller
4. Align the bolt and anti-scalp roller in the hole of the
bracket that matched the closest height-of-cut position
(
Figure 24 ).
5. Insert the bolt into the bracket hole and secure the bolt
and anti-scalp roller with the flange nut (
Figure 24 ).
Positioning the Seat
The seat can move forward and backward ( Figure 25 ).
Position the seat where you have the best control of the
machine and are most comfortable.
Figure 25
Changing the Seat Suspension
The seat is adjustable to provide a smooth and comfortable
ride. Position the seat where you are most comfortable.
To adjust it, turn the knob in front either direction to provide
the best comfort (
Figure 26 ).
1
Figure 26
1. Seat-suspension knob
23