Toro TimeCutter Z Series, Service Manual

Page: 9 / 118

SPECIFICATIONS
TimeCutter™ Z Service Manual 1 - 5
1b
Specifications (cont’d)
Z17-52 Z18-52
ENGINE:
High Idle 3400 ± 100 RPM 3400 ± 100 RPM
Low Idle 1400 RPM 1400 RPM
Manufacturer Kohler Kawasaki
Horsepower (kW) 17 HP (12.7kW) @ 3600 RPM 18 HP (13.4kW) @ 3600 RPM
Fuel Unleaded Gasoline 87 octane min. Unleaded Gasoline 87 octane min.
FUEL SYSTEM:
Capacity 5 Gallon (18.9 L) 5 Gallon (18.9 L)
TRACTION SYSTEM:
Transaxles Twin Hydro-Gear IZT Hydrostatic
Transaxles
Twin Hydro-Gear IZT Hydrostatic
Transaxles
Transaxle Drive Belt drive with self-tensioning system Belt drive with self-tensioning system
Ground Speed Infinite, 0 to 6.5 MPH (10.5-km/hr) forward
0 to 3.4 MPH (5.5-km/hr) reverse
Infinite, 0 to 6.5 MPH (10.5-km/hr) forward
0 to 3.4 MPH (5.5-km/hr) reverse
TIRES:
Rear Drive Tires 18x10-10-10.5 4 ply with “Multitrac CS”
Tread
18x10-10-10.5 4 ply with “Multitrac CS”
Tread
Front Caster Tires 410/350 x 4 - 4.25 IS with “sawtooth” tread 410/350 x 4 - 4.25 IS with “sawtooth” tread
Tire Pressure 13 psi (90 kPa) rear, 35 psi (241 kPa) front 13 psi (90 kPa) rear, 35 psi (241 kPa) front
ELECTRICAL SYSTEM:
Battery Voltage 12 volt, negative ground 12 volt, negative ground
Battery Type BCI Group U1 BCI Group U1
DIMENSIONS:
Wheel Base 52.1 in. (132.3 cm) center of caster to
center of drive tires
52.1 in. (132.3 cm) center of caster to
center of drive tires
Overall Width 65 in. (165.1 cm) with deck deflector down
58 in. (147.3 cm) gate width with deck
deflector up
65 in. (165.1 cm) with deck deflector down
58 in. (147.3 cm) gate width with deck
deflector up
Overall Length 77.5 in. (196.9 cm) 77.5 in. (196.9 cm)
WEIGHT:
Net Weight 680 lbs. (approx.) 680 lbs. (approx.)
HEIGHT OF CUT:
Adjusts from 1.5” (3.8 cm) to 4.5” (11.4 cm)
(7 positions) Adjusts from 1.5” (3.8 cm) to 4.5” (11.4 cm)
(7 positions)