Toro TimeCutter Z Series, Service Manual

Page: 13 / 118

A1-9 TimeCutter ZX Service Manual
1b
SPECIFICATIONS
ZX 17-52 ZX 18-52
Tires:
Rear Drive Tires 18x10-8 4 ply with “Multitrac CS” Tread 18x10-10.5 4 ply with “Multitrac CS”
Tread
Front Castor Tires 410/350x4 - 4.25 IS with “sawtooth” tread 410/350x4 - 4.25 IS with “sawtooth” tread
Tire Pressure 13 psi (90kPa) rear, 35 psi (241kPa) front 13 psi (90kPa) rear, 35 psi (241kPa) front
Electrical System:
Battery voltage 12 volt negative ground. 12 volt negative ground.
Fused (1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 10 amp included with optional light kit. (1) 30 amp blade type main.
(1) 25 amp blade type charge system.
(1) 10 amp included with optional light kit.
Dimensions:
Wheel Base 52.1” (132.3cm) center of castor wheel to
center of drive tires. 52.1” (132.3cm) center of castor wheel to
center of drive tires.
Width 47.6” (120.9cm) outside rear tires. 47.6” (120.9cm) outside rear tires.
Overall Width 65” (165.1cm) with deck defl ector down.
58” (147.3cm) Gate width with deck
defl ector up. 65” (165.1cm) with deck defl ector down.
58” (147.3cm) Gate width with deck
defl ector up.
Overall Length 77.5” (196.9cm) 77.5” (196.9cm)
Overall Height 41” (104.1cm) 41” (104.1cm)
Track Width 37.5” (95.3cm) center to center of rear
tires.
30.4” (77.2cm) center to center of castor
tires. 37.5” (95.3cm) center to center of rear
tires.
30.4” (77.2cm) center to center of castor
tires.
Deck Width 65” (165.1cm) with deck defl ector down. 65” (165.1cm) with defl ector down.
Weight: 680 lbs. (308.4kg) (estimated) 680 lbs. (308.4kg) (estimated)
Height of Cut: Adjusts from 1.5” to 4.5” (7 postions) Adjusts from 1.5” to 4.5” (7 postions)
Tip Speed: 17,410 ft/min @ 3400 RPM nominal
17,980 ft/min @ 3400 RPM max 17,410 ft/min @ 3400 RPM nominal
17,980 ft/min @ 3500 RPM max
Specifi cations cont.