Toro TimeCutter SW 4200, Service Manual

Page: 74 / 142

HYDROSTATIC DRIVE SYSTEM
5-9 Toro Timecutter SW/SWX Service Manual
5
8. Remove the drive belt tensioner spring (Fig. 063).
Fig. 063 PICT-1091
9. Slip the drive belt off the idler pulleys, then off the
appropriate hydro input pulley.
10. If equipped, disconnect and plug the hydro reservoir
hoses at the hydro fitting. Be sure to capture and
dispose of fluid and shop towels properly (Fig. 064).
(SWX only)
Fig. 064 PICT-1104
11. Remove the hydro center support:
Wide Frame – Remove the (6) mounting fasteners (Fig.
065).
Fig. 065 PICT-1094
Narrow Frame
– Remove the (4) mounting fasteners
(Fig. 066).
Fig. 066 PICT-1095
12. Safely support hydro assembly in current position
using a hydraulic floor jack.