Toro TimeCutter 74726, Operator'S Manual

Page: 12 / 64

decal132-0872
132-0872
1. Thrown object
hazard—keep bystanders
away from the machine. 3. Severing hazard of hand
or foot—keep away from
moving parts.
2. Thrown object hazard,
raised baffle—do not
operate the machine with
an open deck; use a
bagger or a baffle. 4. Entanglement
hazard—keep away
from moving parts; keep
all guards and shields in
place.
decal133-9255
133-9255
Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator’s Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions
on that day and at that site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while operating on slopes can
cause the machine to become unstable.
1. Warning—read the Operator's Manual . 5. Tipping hazard—do not use on slopes near open water; do
not use on slopes greater than 15°.
2. Ramp hazard—do not use dual ramps when loading onto a
trailer; use 1 ramp wide enough for the machine; use a ramp
with a slope less than 15°; back up the ramp when loading the
machine and drive forward off the ramp when unloading. 6. Cutting/dismemberment hazard of the hand, mower blade;
entanglement hazard of the hand, belt—stay away from
moving parts; keep all guards and shields in place.
3. Thrown object hazard—keep bystanders away; pick up
debris before operating; lower the deflector before using the
machine. 7. Warning—before performing maintenance, read the
Operator's Manual ; engage the parking brake, remove the
key, and disconnect the spark plug.
4. Runover/backover hazard—do not carry passengers; look
behind you when mowing in reverse.
12