Toro TimeCutter 136-7493, Installation Instructions Manual

Page: 5 / 12

Routing the Wire Harness
1. Beginning from the left side, route the wire harness next to the fuel tank, along the main machine wire
harness (
Figure 9 ).
2. Continue routing the wire harness underneath the seat plate, moving toward the controls ( Figure 10 ).
3. Continue routing the wire harness toward the controls ( Figure 10 ).
4. Secure the wire harness to the main machine wire harness using 4 cable ties as shown in Figure 9 and
Figure 10 .
5. Connect the side light wire-harness lead to the connector on the wire harness for the light kit ( Figure 10 ).
g210690
Figure 9
g210692
Figure 10
5