Toro TimeCutter 136-7493, Installation Instructions Manual

Page: 3 / 12

Installing the Front LED
Light
1. If you have a machine with a MyRide™
platform , remove the existing 2 thread-forming
screws (5/16 x 3/4) securing the bumper
brackets (
Figure 1 ).
g210249
Figure 1
1. Bumper bracket 2. Thread-forming screw
(5/16 x 3/4 inch)
2. If you have a machine with a MyRide™
platform , install the front light bracket using the
previously removed 2 thread-forming screws
(5/16 x 3/4) as shown in
Figure 2 .
g210246
Figure 2
1. Front light bracket 2. Thread-forming screw
(5/16 x 3/4 inch)
3. If you have a machine with a standard platform ,
install the front light bracket to the front axle tube
using the 2 thread-forming screws (5/16 x 3/4)
provided with the kit (
Figure 3 ).
g210247
Figure 3
1. Front axle tube
3. Thread-forming screw
(5/16 x 3/4 inch)
2. Front light bracket
4. Secure the LED light to the front light bracket
using a hex-head bolt (5/16 x 3/4 inch) and
flange nut (5/16 inch) as shown in
Figure 4 .
g210248
Figure 4
Standard Platform Shown
1. Flange nut (5/16 inch) 3. Hex-head bolt (5/16 x 3/4
inch)
2. LED light 4. Front light bracket
3