Important:
Route the cables to the
outside
of
the handle (Figure 3).
3. Rotate the handle rearward (Figure 4).
Figure 4
4. Lock the handle at your desired height. Refer to
Adjusting the Handle Height in the Operation
section.
5. Torque the handle bolts to 120 to 160 in-lb (14 to
17 N-m).
6. Adjust the cutting height. Refer to Adjusting the
Cutting Height.
2
Installing the Starter Rope
No Parts Required
Procedure
Pull the starter rope through the rope guide on the
handle (Figure 5).
Figure 5
1.
Starter rope
2.
Rope guide
Note:
To make the rope easier to install, squeeze the
control bar on the handle.
3
Filling the Engine with Oil
No Parts Required
Procedure
Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 6).
Figure 6
6
Summary of Contents for Super Recycler 20794
Page 21: ...Notes 21 ...
Page 22: ...Notes 22 ...
