Cutting Units
03857, 03858, 03859
Reelmaster 6500–D/6700–D
Page 8.1 – 33
Cutting Units
Rev. C
Model 03857, S/N 80302 & Up
Model 03858, S/N 81419 & Up
Model 03859, S/N 81993 & Up
Greasing Bearings, Bushings and Pivot Points
IMPORTANT: Lubricating cutting units immediately
after washing helps purge water out of bearings and
increases bearing life.
Each cutting unit has (7) grease fittings that must be lu-
bricated regularly with No. 2 General Purpose Lithium
Base Grease.
The lubrication points are front roller (2), rear roller (2),
reel bearing (2), and bedknife adjuster.
1.
Wipe each grease fitting with a clean rag.
2.
Apply grease until pressure is felt against handle.
3.
Wipe excess grease away.
Note:
Apply grease to reel bearing cavities until a small
amount is evident at the inboard reel seal.
Figure 52
(2)
(2)
(2)
Summary of Contents for REELMASTER 6500 D
