Toro Reelmaster 5610, Operator'S Manual

Page: 24 / 68

Product Overview
g216864
Figure 41
1. Engine hood 5. Seat adjustments
2. Seat 6. Front cutting units
3. Control arm 7. Rear cutting units
4. Steering wheel
Controls
Seat-Adjusting Knobs
The seat-adjusting lever ( Figure 42 ) allows you to
adjust the seat forward and rearward. The weight
adjusting knob adjusts the seat for your weight. The
weight gauge indicates when the seat is adjusted to
your weight. The height-adjusting knob adjusts the
seat for your height.
g003954
Figure 42
1. Weight gauge 3. Height-adjusting knob
2. Weight-adjusting knob 4. Adjusting lever (forward
and rearward)
Traction Pedal
The traction pedal ( Figure 43 ) controls the forward and
reverse operation. Press the top of the pedal to move
forward and the bottom to move rearward. Ground
speed depends on how far you press the pedal. For
no load, maximum ground speed, fully press the pedal
while the throttle is in the F
AST
position.
To stop, reduce foot pressure on the traction pedal
and allow it to return to the center position.
Mow-Speed Limiter
When the mow-speed limiter ( Figure 43 ) is flipped
up, it controls the mow speed and allows the cutting
units to be engaged. Each spacer adjusts the mowing
speed by ½ mile per hour. The more spacers you
have on the top of the bolt, the slower you will go. For
transport, flip back the mow-speed limiter and you will
have maximum transport speed.
Brake Pedal
Press the brake pedal ( Figure 43 ) to stop the machine.
Parking Brake
To engage the parking brake, ( Figure 43 ) push down
the brake pedal and press the top forward to latch. To
release the parking brake, press the brake pedal until
the parking brake latch retracts.
g003955
Figure 43
1. Traction pedal 4. Brake pedal
2. Mow-speed limiter 5. Parking brake
3. Spacers 6. Tilt-steering pedal
24