111-1033TH051006
OPERATING THE MOWER
MK3 200mm (8") FLOATING CUTTERHEAD
1D876P07A
1D876P06B
B
A
D
E
1D876P10A
C
E
=
A
F
1.44
1.44
Pivot knuckle fixing:
Secure the bolt in the rear “floating” slot posi-
tion ‘A’ as shown.
Height of cut adjustment:
The height of cut is gauged by the position
of the front and rear rollers.
To alter the rear roller position, turn the adjusting nut assembly ‘B’ both
ends clockwise to decrease height of cut ‘E’ or anti-clockwise to
increase height of cut ‘E’.
IMPORTANT: PREVENT DAMAGE - Do not attempt to unlock
the nut assemblies, ‘B’.
To alter the front roller position loosen bolts ‘F’. Release and turn
adjusting nuts ‘D’ both ends clockwise to increase the height of cut or
anti-clockwise to decrease the height of cut.
Ensure that all cutterheads are set at the same height of cut by referring
to the indicator rings ‘C’ or use the height of cut gauge across the full
width of each cutterhead as shown.
Tighten nuts ‘D’ and ‘F’ both ends.
Summary of Contents for Reelmaster 3220-D
Page 2: ......
Page 33: ...111 1033TH051006 OPERATING THE MOWER 1 33 1 33 1 2 3 4 3 4 fig 1 ...
Page 79: ...111 1033TH051006 1 79 1 79 HYDRAULIC CIRCUIT DIAGRAM RM3220 D 1D922C16 ...
Page 81: ...111 1033TH051006 HYDRAULIC CIRCUIT DIAGRAM RM3240 D 1 81 1 81 ...
