Toro Recycler 20357, Operator'S Manual

Page: 7 / 72

g208181
Figure 4
1. Handle lock engaged
position 2. Handle lock disengaged
positions
2. Set the handle lock ( Figure 5 ) until the pin clicks
in place to lock the handle into the operating
position.
g206253
Figure 5
1. Handle lock 2. Pin
Note:
To adjust the handle height, refer to Adjusting
the Handle Height (page 10) .
2
Installing the Recoil-starter
Rope in the Rope Guide
No Parts Required
Procedure
Important:
To start the engine safely and easily
whenever you use the machine, install the
recoil-starter rope in the rope guide.
Hold the blade-control bar to the upper handle and
pull the recoil-starter rope through the rope guide on
the handle (
Figure 6 ).
g003251
Figure 6
1. Recoil-starter rope 2. Rope guide
3
Filling the Engine with Oil
No Parts Required
Procedure
Important:
Your machine does not come with oil
in the engine, but it does come with a bottle of oil.
Before starting the engine, fill the engine with oil.
Engine oil capacity: 0.5 L (16.9 fl oz)
Oil viscosity: SAE 30 or SAE 10W-30 detergent oil
API service classification: SJ or higher
1. Move the machine to a level surface.
2. Remove the dipstick by rotating the cap
counterclockwise and pulling it out (
Figure 7 ).
6