13
Setup
Note: Determine the left and right sides of the machine
from the normal operating position.
Loose Parts
Note: Use the chart below to identify parts for assembly.
Step
Description
Qty.
Use
1
No parts needed
–
Removing the shipping bracket
2
Handle assembly
Flanged bolt 3/8 x 1 inch
Flanged bolt 3/8 x 1–1/4 inch
Flange nut 3/8 inch
1
2
2
4
Installing the handle assembly
3
Fuel tank with studs installed
Locknut, 5/16 inch
Bolt, 5/16 x 7/8 inch
Lock washer, 5/16 inch
Washer, 5/16 inch
Spring
Hose clamp
1
2
2
2
4
2
1
Installing the fuel tank
4
E–ring
2
Installing the control rods
5
Washer
Cotter pin
1
1
Installing the speed control rod
6
Hairpin cotter pin
Spacer
2
6
Installing the hairpin cotter pins and
spacers
7
No parts needed
–
Checking the tire pressure
8
No parts needed
–
Checking the hydraulic fluid and engine
oil
9
No parts needed
–
Setting up the hydro control linkage
10
Oil drain hose
Operator’s Manual
Engine Operator’s Manual
Safety Video
Parts Catalog
Registration card
1
1
1
1
1
1
Use for draining the engine oil
Read before operating machine
Read before operating machine
Watch before operating machine
Fill out and return to Toro
