Problem
Possible Cause
Corrective Action
1. Shift lever is in neutral.
1. Move shift lever to a
drive gear position.
2. Traction belt is worn,
loose or broken.
2. Change the belt.
3. Traction belt is off a
pulley.
3. Change the belt.
Machine does not drive.
4. Broken or missing idler
spring.
4. Replace the spring.
1. Cutting blade(s) is/are
bent or unbalanced.
1. Install new cutting
blade(s).
2. Blade mounting bolt is
loose.
2. Tighten the blade
mounting bolt.
3. Engine mounting bolts
are loose.
3. Tighten the engine
mounting bolts.
4. Loose engine pulley,
idler pulley, or blade
pulley.
4. Tighten the appropriate
pulley.
5. Engine pulley is
damaged.
5. Contact an Authorized
Service Dealer.
Abnormal vibration.
6. Blade spindle is bent.
6. Contact an Authorized
Service Dealer.
1. Blade(s) not sharp.
1. Sharpen the blade(s).
2. Cutting blade(s) is/are
bent.
2. Install new cutting
blade(s).
3. Mower is not level.
3. Level mower from
side-to-side and
front-to-rear.
4. Underside of mower is
dirty.
4. Clean the underside of
the mower.
5. Tire pressure is not
correct.
5. Adjust the tire pressure.
Uneven cutting height.
6. Blade spindle bent.
6. Contact an Authorized
Service Dealer.
41
Summary of Contents for Proline 30187
