PRELIMINARY – For Toro Distributor
and Toro Company
use only.
ProForce Debris Blower
Page 3
−
3
Engine
General Information
This Chapter gives information about specifications,
maintenance, troubleshooting, testing and repair of the
gasoline engine used in the ProForce Debris Blower.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the KOHLER ENGINE SERVICE
MANUAL that is included at the end of this Chapter. The
use of some specialized test equipment is explained.
However, the cost of the test equipment and the special-
ized nature of some repairs may dictate that the work be
done at an engine repair facility.
Service and repair parts for Kohler engines are supplied
through your local Toro distributor. Be prepared to pro-
vide your distributor with the Toro model and serial num-
ber.
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your ProForce Debris Blower machine. Re-
fer to the Operator’s Manual for additional information
when servicing the machine.
Electrical Power
Electrical power to ProForce Debris Blower compo-
nents is controlled by the Remote Control Module. To
make sure that machine operation does not occur unex-
pectedly, disconnect the negative battery cable from the
battery before performing any machine service.
Reattach the disconnected negative battery cable as
the last step in any repair. Secure cable with flange nut.
Torque nut from from
10 to 15 ft
−
lb (14 to 20 N
−
m)
.
