Toro Pro Sweep 07068, Operator'S Manual

Page: 16 / 40

Note:
Position the longer end of the blade away
from the machine.
3. Secure the chain to the blade mounting
assembly with a bolt (3/8 x 1-1/4 inches) and a
flange nut (3/8 inch) (
Figure 16 ).
4. Secure the other end of the chain to the slot in
the frame with the snap link (
Figure 16 ).
Note:
There should be some slack in the chain
when connected.
5. Grease the fitting on the blade mounting
assembly and on the windrow blade hub with
No. 2 lithium grease.
Note:
When the windrow is not required,
unhook the chain from the snap link, pivot the
windrow assembly upward, and hook the chain
at the raised level.
g030462
Figure 16
1. Bolt (7/16 x 3-3/4 inches) 8. Windrow blade
2. Small washer (1/2 inch) 9. Spacer
3. Machine frame 10. Bolt (3/8 x 1-1/4 inches)
4. Large washer 11. Chain
5. Blade-mount assembly 12. Flange nut (3/8 inch)
6. Locknut (7/16 inch) 13. Snap link
7. Bolt (7/16 x 3-1/4 inches)
16