background image

Using the Attachments

Use the provided attachments as needed.

Note:

The Gutter Cleaner Kit (Model 51667) and Oscillating

Tube (Model 51664) are sold separately.

g194438

Figure 7

1.

Gutter cleaner adaptor

3.

Oscillator/MPH insert
adapter

2.

Blower tube

4.

MPH insert

Charging the Battery Pack

Important:

Read all safety precautions.

Important:

For best results, your battery pack should

be charged in a location where the temperature is more
than 0°C (32°F) but less than 50°C (122°F). To reduce the
risk of serious personal injury, do not store the battery
pack outside or in vehicles. Charging time increases if
you do not charge it within this range.

Note:

At any time, press the battery-charge-indicator button

on the battery pack to display the current charge (LED
indicators).

1.

Make sure that the vents on the battery are clear of any
dust and debris.

2.

Line up the cavity in the battery pack (

Figure 8

with

the tongue on the charger.

g192748

Figure 8

1.

Battery pack cavity

4.

Battery-charge-indicator
button

2.

Battery pack terminals

5.

LED indicators (current
charge)

3.

Battery pack venting areas

3.

Make sure that the vents on the battery charger are
clear of any dust and debris.

4.

Slide the battery pack into the charger until it is fully
seated (

Figure 9

).

g194423

Figure 9

1.

Charger venting areas

3.

Right indicator light

2.

Left indicator light

5.

To remove the battery pack, slide the battery backward
out of the charger.

7

 

Summary of Contents for Power Plex 51690













Reviews: