background image

3. 

The desired working speed of the Workman

®

vehi-

cle, in miles per hour.

OPTIONAL FLOW CONTROL 
(MODEL NO. 41403)

The two limit switches control the length of the actua-
tor's extension or retraction and must be adjusted to
match the actuator's action to the flow regulator.

NOTE: After positioning the limit switches for a full
“OPEN” and a full “CLOSE” disc opening as described
in the flow control set-up instructions, the front limit
switch should not need further adjustment.  However, the
rear limit switch must be readjusted to achieve any of the

other rate of flow settings indicated on the regulator
scale, as follows:

Fig. 6

1. Toggle 

switch

2. Control 

box

Flow regulator handle

4. 

Flow regulator scale

1. 

Use the toggle switch on the control box to extend
or retract the actuator until the front edge of the
flow regulator handle is at the selected number on
the regulator scale.

5

Fertilizer Type

PTO

Speed

RPM

Spread

Width

Kmh

1

2

3

4

5

6

7

Coarse Grain

540

18.3 m

4.0
5.6
8.0
9.7

12.1

39.5
26.4
19.3
15.6
12.8

180.1

119.8

89.5
71.9
59.1

451.9
300.7
201.1
180.9
154.9

804.3
536.0
402.0
322.0
267.4

1232.3

819.9
616.0
491.2
410.4

1639.8
1092.9

819.9
654.8
546.1

1999.5
1333.6

999.8
798.6
666.9

Medium Grain

540

15.2 m

4.0
5.6
8.0
9.7

12.1

44.2
29.4
22.2
17.5
14.8

209.3
140.1
104.3

84.0
72.6

525.8
349.6
261.9
207.6
174.2

915.0
610.6
457.4
357.8
304.4

1345.7

896.5
672.4
537.7
448.2

1806.8
1204.6

903.9
722.3
546.1

2302.0
1534.7

1150.0

920.4
666.9

Fine Grain

540

12.2 m

4.0
5.6
8.0
9.7

12.1

52.6
35.1
26.7
20.3
17.5

309.9
205.6
154.9
123.6
105.8

677.8
451.9
337.0
271.1
225.8

1116.9

744.3
554.2
455.2
371.6

1609.4
1073.6

804.3
642.7
536.0

2101.8
1401.1
1051.4

841.1
700.0

2525.4
1683.2
1262.7
1010.9

842.1

Application Rate in kg/acre per Flow Regulator Setting

USE THE FOLLOWING CHART AS A GUIDELINE TO DETERMINE A FLOW REGULATOR SETTING.  Flow
rates will not always be the same as those shown because of weather conditions and variances in density, moisture
content and particle size.

TIPPING OR ROLLING THE VEHICLE

CAN CAUSE SERIOUS INJURY OR DEATH.

Do not drive vehicle at speeds that can cause loss
of vehicle control.

DANGER

Summary of Contents for PA-17









Reviews: