Chassis Maintenance
Inspecting the Seat Belt
Service Interval:
Before each use or daily
1.
Inspect the seat belt for wear, cuts, and other
damage. Replace the seat belt(s) if any
component does not operate properly.
2.
Clean the seat belt as necessary.
Checking the Fasteners
Service Interval:
Before each use or daily
Check the machine for loose and missing fasteners.
Note:
Tighten any loose fasteners; replace any
missing fasteners.
Extended Maintenance
Service Interval:
Every 250 hours—Inspect the
cooling-system hoses.
Every 2 years—Flush and replace the coolant.
Every 2 years—Replace all moving hoses.
Every 2 years—Replace the transmission cable.
Disposing of Waste
Engine oil, batteries, hydraulic fluid, and engine
coolant are pollutants to the environment. Dispose of
these according to your local regulations.
When disposing of hazardous waste products, take
them to an authorized disposal site. Do not allow
waste products to contaminate surface water, drains,
or sewage systems.
Important:
Dispose of hazardous substances
correctly.
Do not dispose of batteries with a separate
collection mark into general waste.
When disposing of hazardous waste products,
take them to an authorized disposal site.
Cleaning
Washing the Machine
Wash the machine as needed using water alone
or with a mild detergent. You may use a rag when
washing the machine.
Important:
Do not use brackish or reclaimed
water to clean the machine.
Important:
Do not use power-washing equipment
to wash the machine. Power-washing equipment
may damage the electrical system, loosen
important decals, or wash away necessary grease
at friction points. Avoid excessive use of water
near the control panel, engine, and battery.
Important:
Do not wash the machine with the
engine running. Washing the machine with the
engine running may result in internal engine
damage.
58
