Toro LT2240, Operator'S Manual

Page: 42 / 68

g348419
Figure 66
1. Oil pan (engine) 3. Drain plug (engine oil)
2. Gasket
4. When all the oil is drained, install the drain plug.
5. Remove the oil filter ( Figure 67 ).
g348422
Figure 67
1. Oil filter (engine) 2. Adapter (oil filter)
6. Apply a light coat of clean oil to the oil filter
gasket.
7. Thread the oil filter onto the oil filter-adapter until
it contacts the mounting surface, and tighten the
filter an additional turn.
Important:
Do not overtighten the filter.
8. Add oil to the crankcase; refer to Oil Specification
(page 41) and Checking the Engine-Oil Level
(page 41) .
9. Close and latch the hood.
Extended Engine
Maintenance
Service Interval: After the first 50 hours—Check the
engine speed (idle and full throttle).
Every 400 hours—Check the engine speed (idle
and full throttle).
42