This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Introduction
This machine is a ride-on, reel-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed
for cutting grass on well-maintained turf. Using this
product for purposes other than its intended use could
prove dangerous to you and bystanders.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
Visit
www.toro.com/en-gb
for more information,
including safety tips, training materials, accessory
information, help finding a dealer, or to register your
product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
g347997
Figure 1
1.
Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(
), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
g000502
Figure 2
Safety-alert symbol
This manual uses 2 words to highlight information.
Important
calls attention to special mechanical
information and
Note
emphasizes general information
worthy of special attention.
Contents
Safety ....................................................................... 4
General Safety ................................................... 4
Safety and Instructional Decals .......................... 5
Controls ............................................................. 9
Control Console Controls ................................ 9
Control Console Indicators ............................ 12
Operator’s Seat Controls............................... 14
Transport Latches ........................................ 16
Before Operation ................................................. 18
Before Operation Safety ................................... 18
Performing Daily Maintenance.......................... 18
Filling the Fuel Tank .......................................... 18
Understanding the Operator-Presence
Controls ........................................................ 19
During Operation ................................................. 20
General Safety ................................................. 20
Rollover Protection System (ROPS)
Safety............................................................ 20
Machines with a Foldable Roll Bar .................... 21
Slope Safety ..................................................... 21
Lowering the Roll Bar........................................ 21
Raising the Roll Bar .......................................... 22
Starting and Shutting Off the Engine ................. 22
Using the Cutting Units ..................................... 23
Controlling the Position of the Individual
Cutting Units ................................................. 24
Raising the Cutting Units .................................. 24
Auto-Limited Lift in Reverse .............................. 24
Cutting Unit Drive ............................................. 25
Adjusting the Weight Transfer/Traction
Assistance .................................................... 25
After Operation .................................................... 27
General Safety ................................................. 27
Identifying the Tie-Down Points ........................ 28
Hauling the Machine ......................................... 28
Towing the Machine .......................................... 28
© 2021—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the UK
All Rights Reserved
