Attributes:
•
Discharge remains more even at lower heights of
cut.
•
Discharge has less tendency to throw left and thus
a cleaner look around bunkers and fairways.
•
Lower power requirement at lower heights and
dense turf.
High-Lift Parallel Sail (Not CE
Compliant)
The blade generally performs better in the higher
heights of cut—7 to 10 cm (2 to 4 inches).
Attributes:
•
More lift and higher discharge velocity
•
Sparse or limp turf is picked up significantly at
higher heights of cut
•
Wet or sticky clippings are discharged more
efficiently reducing congestion in the deck
•
Requires more horsepower to run
•
Tends to discharge further left and can tend to
windrow at lower heights of cut
WARNING
Using a high-lift blade with the mulching baffle
could cause the blade to break, resulting in
personal injury or death.
Do not use the high-lift blade with the
mulching baffle.
Atomic Blade
This blade was designed to provide excellent leaf
mulching.
Attribute: Excellent leaf mulching
Understanding the
Diagnostic Light
The machine is equipped with a diagnostic light, which
indicates if the machine detects a malfunction. The
diagnostic light is located on the InfoCenter, above
the display screen (
). When the machine
functions properly and the key switch is moved to
the O
N
/R
UN
position, the diagnostic light turns on
briefly to indicate that the light is working properly.
When a machine advisory message displays, the light
illuminates when the message is present. When a
fault message is displayed, the light blinks until the
fault is resolved.
g021272
Figure 24
1.
Diagnostic light
Changing the
Counterbalance Settings
You can change the amount of required cutting-unit
counterbalance (upward lift) to meet your current
mowing conditions.
1.
Park the machine on a level surface, lower the
cutting decks, turn the key in the switch to the
O
FF
position, and engage the parking brake.
2.
Turn the key in the switch to the R
UN
position.
3.
In the InfoCenter Settings Menu, scroll down to
Counterbalance
.
4.
Press the right button to select counterbalance
and change between the low, medium, and high
settings.
Note:
Once the adjustment has been
completed, move the machine to a test area and
operate the machine with the new setting. The
new counterbalanced setting may change the
effective height of cut.
31
Summary of Contents for Groundsmaster 4300-D
Page 9: ...decal138 6975 138 6975 1 Read the Operator s Manual 9...
Page 75: ...Notes...
Page 76: ...Notes...
Page 77: ...Notes...
