Safety
This machine has been designed in accordance with
ANSI B71.4-2017 and EN ISO 5395.
General Safety
This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
•
Read and understand the contents of this
Operator’s Manual
before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep your hands and feet away from rotating
parts. Keep clear of the discharge opening.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Shut off the engine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator’s position, Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
, which
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
Cutting Unit Safety
•
The cutting unit is only a part of a complete
machine when installed on a traction unit. Read
the
traction unit
Operator’s Manual
carefully
for complete instructions on the safe use of the
machine.
•
Stop the machine, remove the key, and wait for
all moving parts to stop before inspecting the
attachment after striking an object or if there is
an abnormal vibration in the machine. Make all
necessary repairs before resuming operation.
•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Use only accessories, attachments, and
replacement parts approved by Toro.
4
