Toro groundsmaster 3240-d, Operator'S Manual

Page: 56 / 81

1.56 1.56
Regularly check that the cutterblade securing bolts (items 1 and 2) are tightened to the
specified torque and re-new cutterbar - lock tabs.
Bolt (item 1) - Torque to 70-95Nm.
Bolt (item 2) - Torque to 40-55Nm.
Ensure that each cutterblade is balanced. Use a screw driver with a round shaft to sup-
port the cutterblade through its centre hole. Hold the cutterblade horizontal and then
release. A balanced cutterblade will remain horizontal. If the cutterblade is not bal-
anced the heavy end will rotate downwards. Regrind the heavy end until the cutterblade
is correctly balanced.
MAINTENANCE
CS026
CS025
CUTTERBLADES
1. Bolt - Motor
2. Bolt - Cutterblade
3. Locating Ring
4. Cutterblade Mounting
5. Key - Motor
6. Cutterblade - Lock Tab
5
4
3
2
6
2
1
4D994C01A