Toro Greensmaster eTriFlex 04590, Operator'S Manual

Page: 16 / 56

g014603
Figure 18
1. Traction pedal—forward 3. Steering-arm-locking
pedal
2. Traction pedal—reverse
g005105
Figure 19
You can configure the maximum ground speed as
follows:
•
3.2 to 8 km/h (3 to 5 mph) forward mowing speed
•
8 to 16 km/h (5 to 10 mph) transport speed
•
3.2 to 4.8 km/h (2 to 3 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal ( Figure 18 ) and raise or lower the
steering arm for operator comfort, then, release the
pedal to lock the arm in place.
Brake Pedal
Press the brake pedal ( Figure 20 ) to stop the machine.
g236365
Figure 20
1. Parking brake 2. Brake pedal
Parking Brake
Use the parking brake ( Figure 20 ) to prevent the
machine from moving. To engage the parking brake,
push down on the brake pedal and press the top
forward to latch. To release the parking brake, press
the brake pedal until the parking-brake latch retracts.
InfoCenter
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information
about your machine, such as the operating status,
various diagnostics, and other information about the
machine (
Figure 24 ). There is a splash screen, main
information screen, cutting unit (CU) motor information
screen, and traction information screen.
•
Splash screen : shows current machine
information for a few seconds after you move the
key to the O
N
position.
•
Main information screen ( Figure 21 ): shows
current machine information while the key is in the
O
N
position. This screen shows the battery-system
charge level and the amperage.
g292768
Figure 21
1. Battery-system amperage 2. Battery-system charge
level
•
CU motor information screen ( Figure 22 ):
shows the speed and current of each cutting-unit
motor.
16