Toro Greensmaster eTriFlex 04590, Operator'S Manual

Page: 10 / 56

g277097
Figure 5
Standard Seat (Model No. 04508)
1. Service decal
4
Installing the Steering
Wheel
Parts needed for this procedure:
1 Steering wheel
1 Cap
1 Washer
1 Locknut
Procedure
1. Apply anti-seize compound to the steering shaft.
2. Install the wheel to the steering shaft ( Figure 6 ).
g288302
Figure 6
1. Steering shaft 2. Steering wheel
3. Connect the main-power connectors; refer to
Main-Power Connectors (page 20) .
4. Insert the key and turn it to the O
N
position.
5. Navigate to the traction information screen in the
InfoCenter; refer to
Using the InfoCenter LCD
Display (page 16) .
6. Turn the steering wheel until the steering-wheel
angle (located at the bottom of the screen) reads
“
0° ”. Do not rotate the wheel beyond the stops.
7. Turn the key to the O
FF
position and remove
the key.
8. Disconnect the main-power connectors.
9. Without turning the steering shaft, perform the
following steps:
A. Remove the wheel from the steering shaft.
B. Install the steering wheel in the position
shown in
Figure 7 .
g288301
Figure 7
1. Steering wheel 2. Steering shaft
10. Install the wheel to the steering shaft using the
washer and locknut (
Figure 8 ).
10