Toro Greensmaster eTriFlex 04590, Operator'S Manual

Page: 13 / 56

9
Installing the CE Decals
If Required (CE-Compliant
Countries)
Parts needed for this procedure:
1 Production year decal
1 CE warning decal (Part No. 139-8321)
1 CE mark decal (Part No. 93-7252)
Procedure
If you use this machine in a country that complies to
CE standards, install the following decals:
•
Production year decal and CE mark decal :
apply the decals on the frame tube below the seat
and serial plate; refer to
Figure 13 .
g280284
Figure 13
1. CE mark decal
3. Frame tube
2. Production year decal
•
CE warning decal : Apply the CE warning decal
(Part No. 139-8321) over the existing warning
decal (Part No. 139-8320) on the steering-wheel
cover; refer to
Figure 14 .
g235881
Figure 14
1. CE warning decal
10
Reducing the Tire Pressure
No Parts Required
Procedure
The tires are overinflated at the factory for shipping
purposes. Reduce the pressure to the proper levels
before turning on the machine; refer to
Checking the
Tire Pressure (page 44) .
11
Mounting the Battery
Charger on a Wall
Optional
No Parts Required
Procedure
You can mount the charger on a wall using the
wall-mount key holes cut into the back of the unit. Use
screws that have a 6 mm (1/4 inch) diameter shaft
and a head diameter of 11 mm (0.45 inch).
Important:
Survey your work area and determine
a location that best meets the criteria for safe and
effective operation of the charger.
13