Toro Flex-Force Power System 51810T, Operator'S Manual, Page: 7 / 12

Setup
1
Installing the Auxiliary Handle
Parts needed for this procedure:
1 Auxiliary handle assembly
Procedure
1. Separate the auxiliary handle from the handle plate by removing the 4 socket head screws using the
provided Allen wrench (A of
Figure 3 ).
2. Line up the auxiliary handle with auxiliary handle plate on the trimmer handle (B of Figure 3 ).
3. Secure the auxiliary handle to the handle plate with the 4 socket head screws previously removed (C of
Figure 3 ).
g357443
Figure 3
2
Connecting the Attachment
to the Power Head
No Parts Required
Procedure
To connect your attachment to the power head, refer
to the
Operator’s Manual for your attachment.
7