The Model 51810T Power Head is compatible with
a variety of Toro-approved attachments that, when
combined, comply with specific standards; see the
following table for more detail.
Combination Power
Head
Model
Attachment
Model
Standard
String
Trimmer
51810T
88716
Conforms to
UL STD 82
Certified to CSA
STD C22.2 No. 147
Pole Saw
51810T
88710
Conforms to
UL STD 82
Certified to CSA
STD C22.2 No. 147
Edger
51810T
88714
Conforms to
UL STD 82
Certified to CSA
STD C22.2 No. 147
Cultivator
51810T
88715
Conforms to
UL STD 82
Certified to CSA
STD C22.2 No. 147
Hedge
Trimmer
51810T
88713
Conforms to UL
STD 62841-4-2
Certified to CSA STD
C22.2 62841-4-2
Safety
WARNING—When using electric gardening
appliances, always read and follow basic safety
warnings and instructions to reduce the risk of fire,
electric shock, and personal injury, including the
following:
In addition to these instructions, always read and
follow the safety warnings and instructions included
with your specific attachment before operating the
power head.
IMPORTANT SAFETY
INSTRUCTIONS
I. Training
1.
The operator of the appliance is responsible for
any accidents or hazards occurring to others or
their property.
2.
Do not allow children to use or play with the
appliance, battery pack, or the battery charger;
local regulations may restrict the age of the
operator.
3.
Do not allow children or untrained people to
operate or service this device. Allow only people
who are responsible, trained, familiar with the
instructions, and physically capable to operate
or service the device.
4.
Before using the appliance, battery pack, and
battery charger, read all the instructions and
cautionary markings on these products.
5.
Become familiar with the controls and proper
use of the appliance, battery pack, and battery
charger.
II. Preparation
1.
Keep bystanders and children away from the
operating area.
2.
Use only the battery pack specified by Toro.
Using other accessories and attachments may
increase the risk of injury and fire.
3.
Plugging the battery charger into an outlet that is
not 120 V can cause a fire or electric shock. Do
not plug the battery charger into an outlet other
than 120 V. For a different style of connection,
use an attachment plug adapter of the proper
configuration for the power outlet if needed.
4.
Do not use a damaged or modified battery
pack or battery charger, which may exhibit
unpredictable behavior that results in fire,
explosion, or risk of injury.
5.
If the supply cord to the battery charger is
damaged, contact an Authorized Service Dealer
to replace it.
3