Toro 78531, Operator'S Manual

Page: 2 / 32

This product complies with all relevant European directives.
For details, please see the Declaration of Incorporation (DOI)
at the back of this publication.
Introduction
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
safety and operation training materials, accessory information,
help finding a dealer, or to register your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready.
Figure 1 identifies the location of the
model and serial numbers on the product. Write the numbers
in the space provided.
Figure 1
1. Blower model and serial number location
Model No.
Serial No.
Figure 2
Bagger Serial Number
1. Bagger model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (
Figure 3 ),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Figure 3
1. Safety alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical information
and Note emphasizes general information worthy of special
attention.
Contents
Safety ........................................................................... 3
Safety and Instructional Decals ................................. 4
Setup ............................................................................ 5
1 Preparing the Machine........................................... 6
2 Installing the Bagger Bracket (Z400 Mowers with
48-inch Mower Decks) ......................................... 6
3 Installing the Bagger Bracket (Z400 Mowers with
52-inch Mower Decks) ......................................... 7
4 Installing the Hood Assembly and Bags .................... 8
5 Routing the Bagger Belt into the Blower
Assembly...........................................................10
6 Installing the Blower Assembly ..............................10
7 Adjusting the Flow Baffle......................................12
8 Installing the Discharge Tubes ...............................13
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved