3
Installing the Weights
Parts needed for this procedure:
2
Weight
4
Carriage bolt (3/8 x 1 inch)
4
Flange nut (3/8 inch)
Procedure
1.
Secure the weight to the caster arm using 2
carriage bolts (3/8 x 1 inch) and 2 flange nuts
(3/8 inch) as shown in
.
2.
Repeat this procedure on the other side.
g341474
Figure 6
1.
Carriage bolt (3/8 x 1 inch)
3.
Flange nut (3/8 inch)
2.
Weight
4
Installing the Bagger
Supports and Brackets
Parts needed for this procedure:
2
Lower support
1
Upper support
1
Left, upper bracket
1
Right, upper bracket
2
Backer plate
4
Carriage bolt (5/16 x 2-1/4 inches)
8
Flange nut (5/16 inch)
4
Plain washer
4
Hex-head bolt (5/16 x 3-1/4 inches)
2
Flange-head bolt (3/8 x 1-1/4 inches)
4
Locknut (3/8 inch)
2
Flange-head bolt (5/16 x 1 inch)
Procedure
1.
Loosely secure the upper support to the rear
engine guard using 2 flange-head bolts (5/16 x
1 inch) and 2 flange nuts (5/16 inch) as shown
in
g341518
Figure 7
1.
Flange nut (5/16 inch)
3.
Flange-head bolt (5/16 x
1 inch)
2.
Upper support
10
