Toro 78281, Operator'S Manual

Page: 11 / 20

11
1
2
1206
Figure 17
1. Off-Disengaged 2. On-Engaged
Disengaging the Power Take Off (PTO)
1. Depress the brake and/or clutch pedal(s) to stop the
machine.
2. Push the power take off (PTO) to the off position
(Fig.17).
Using the Attachment Lift
Lever
The attachment lift lever is used to raise and lower various
attachments (Fig. 18).
Raising Attachments
1. Depress the brake pedal to stop the machine.
2. Pull attachment lift lever rearward until latch locks. In
this position the lift will hold the attachment in the up,
or raised position.
Lowering Attachments
1. Depress the brake and/or clutch pedal(s) to stop the
machine.
2. Pull attachment lift lever rearward, to release lift
pressure, and push the button on top to release the latch.
Move lift lever forward to lower attachment.
1205
3
2
4
5
6
1
Figure 18
1. Lift lever
2. Button
3. Dial-A-Height
4. Indicator
5. High
6. Mounting position
Using the Attachment Power
Lift
The attachment power lift (optional on some models) is
used to raise and lower attachments )(Fig. 19.
Raising Attachments
1. Turn key to the on or the run position (Fig. 19).
2. Push the lift switch in the up direction to raise the
attachment lift (Fig. 19). This will lift and hold the
attachment in the up, or raised position.
Lowering Attachments
1. Turn key to the on or run position (Fig. 19).
2. Push the lift switch in the down direction to lower the
attachment lift (Fig. 19). This will lower the attachment
lift.