5. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil
to bring it to the
Full
mark (Figure 49).
G008796
2
3
4
5
6
1
Figure 49
6. Start the engine and drive to a flat area. Check the
oil level again.
Changing the Engine Oil Filter
Service Interval:
Every 200 hours
Note:
Change the engine oil filter more frequently
when operating conditions are extremely dusty or sandy.
1. Drain the oil from the engine; refer to Changing the
Engine Oil.
2. Change the engine oil filter (Figure 50).
G008804
G008748
3/4
1
2
3
4
5
6
Figure 50
Note:
Ensure the oil filter gasket touches the engine
and then an extra 3/4 turn is completed.
3. Fill the crankcase with the proper type of new oil;
refer to Changing the Oil.
Servicing the Engine Oil Cooler
Service Interval:
Every 200 hours
1. Keep the oil cooler free of debris. by cleaning the
fins with a brush.
2. Remove the bolts holding the oil cooler to the engine
housing .
3. Clean the inside of the oil cooler with a brush.
4. Install the oil cooler to the engine housing.
36
Summary of Contents for 74926 Z Master G3
Page 70: ...Notes 70 ...
Page 71: ...Notes 71 ...
