SAVE THESE
INSTRUCTIONS
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area of potential danger.
Replace any decal that is damaged or missing.
decal125-0476
125-0476
Setup
Register your product at www.Toro.com so that Toro can notify
you in the case of a safety or warranty product recall.
g224170
Figure 2
1.
Blower tube
3.
Upper-vacuum tube
2.
Bottom inlet cover
4.
Lower-vacuum tube
Assembling the Blower
Important:
The motor should not run unless the bottom
inlet cover is locked in place.
Note:
If the motor runs without the bottom inlet cover in place,
do not use the appliance. Return it to an Authorized Service
Dealer.
Install the blower tube and bottom inlet cover.
g227713
2
