Toro 41250, Installation Instructions Manual, Page: 8 / 32

3. Remove the backing from a speed decal.
4. Align the top and forward edges of the sprayer decal
(B of
Figure 12 ) with the tape marks that you made
in steps 2 and 1 .
5. Press the decal onto the surface of the tank from the
top down while removing air bubbles as you apply the
decal.
6. Remove the masking tape from the tank.
7. Repeat steps 3 though 6 at the other side of the tank.
Installing the Speed Sign the
Center-Boom Section
1. Remove the backing from a speed decal (A of Figure
13 ).
Figure 13
2. Align the decal to the speed sign as shown in B of
Figure 13 .
3. Press the decal onto the surface of the tank from the
top down while removing air bubbles as you apply the
decal.
4. Remove the 2 flange locknuts (5/16 inch) that secure
the bracket for the lift-cylinder manifold to the
lift-cylinder mount (
Figure 14 ).
Note:
Do not remove the 2 flange-head bolts (5/16
x 1 inch)
Figure 14
1. Flange locknuts (5/16
inch) 4. Bracket (lift-cylinder
manifold)
2. Lift-cylinder mount 5. Speed sign
3. Flange-head bolt (5/16 x
1 inch)
5. Assemble the speed sign to the 2 flange-head bolts
(5/16 x 1 inch) with the 2 flange locknuts (5/16 inch)
that you removed in step
4 .
6. Torque the nuts and bolts to 198 to 254 N∙m (175 to
225 in-lb).
8