Figure 52
1.
3-position switch
2.
8-socket connector (with
the line in slot number 1)
7.
Align the control-panel cover to the side console
(
).
Figure 53
1.
Control-panel cover
2.
Side console
8.
Secure the control-panel cover to the side console
with the 4 hex-head screws (1/4 x 1/2 inch) removed
in step
.
9.
Install the knob onto the differential-lock rod (
13
Connecting the Battery
No Parts Required
Procedure
1.
Align the ring terminal for the machine wire harness,
ring terminal of the kit wire harness, terminal for
the positive battery cable to the positive battery post
(
).
Figure 54
1.
Nut
5.
Ring terminal (machine
wire harness)
2.
Positive battery post
6.
Ring terminal (kit wire
harness)
3.
Terminal (positive battery
cable)
7.
Bolt
4.
Insulator cover
2.
Secure the ring terminals and battery terminal to the
battery post (
) with the bolt and nut removed
in step
of
1 Preparing the Machine (page 4)
.
3.
Align the insulator cover over the positive battery
terminal (
21