![background image](http://html1.mh-extra.com/html/toro/39696/39696_operators-manual_1133856010.webp)
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Check the fluids and tire pressure.
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Safety Video
1
Registration Card
1
2
Oil drain hose
1
Read the Operator’s Manual and watch
the video before operating the machine.
Note:
Determine the left and right sides of the machine from the normal operating position.
1
Checking the Fluids and Tire
Pressure
No Parts Required
Procedure
•
Before you start the engine and use the machine,
check the oil level in the engine crankcase; refer to
Checking the Engine Oil Level.
•
Check the grease for the mower and mower deck.
•
Check the tire pressure; refer to Checking the Tire
Pressure.
Note:
The cutting blades are set to a 3 inch (76mm)
height-of-cut at initial purchase. The axle position is
D
,
with 4 spacers below both the spindle and the caster.
2
Reading the Manual and
Viewing the Safety Video
Parts needed for this procedure:
1
Operator’s Manual
1
Engine Operator’s Manual
1
Parts Catalog
1
Safety Video
1
Registration Card
1
Oil drain hose
Procedure
•
Read the
Operator’s Manual
.
•
View the safety video.
•
Fill out the registration card and mail it in or register
online at www.Toro.com.
•
Use the oil drain hose when changing the engine oil.
10
Summary of Contents for 39696
Page 6: ...Slope Chart 6...