Electric Starter Removal (continued)
2. Remove the 2 (#6 x 2.5 in) screws securing the electric starter switch box to
the shroud.
3. Unwind the harness retainer clip and remove the electric starter wire from the
harness retainer clip.
g323979
Figure 15
4. Remove the 2 (M6 x 35 mm) bolts securing the electric starter to the engine.
Note:
If the dowel pins were inadvertently removed, retain for installation.
g323978
Figure 16
5. Remove the electric starter from the engine.
Electric Starter Installation
1. If the dowels were inadvertently removed, install the dowel pins.
Engine: Service and Repairs
Page 4–10
POWER CLEAR® 721/821 Snowthrower Service Manual
3438-776 Rev A
