Shroud Removal (continued)
g320930
Figure 44
5. Remove the 2 (1/4-20 x 1 inch) screws securing the front of the shroud to
the auger housing.
6. Remove the 3 (M4.2 x 2.25mm x 3/4 inch) screws securing the RH shroud
to the side cover.
g320931
Figure 45
7. Remove the 2 (#6 x 2.5 inch) screws and 2 hex nuts securing the shroud to
the switch box. Remove the shroud from the machine.
Note:
Remove the starter plug from the shroud, if equipped with electric start.
POWER CLEAR® 721/821 Snowthrower Service Manual
Page 5–9
Chassis: Service and Repairs
3438-776 Rev A
