Figure 15
1.
Cam lock
3.
Rotate cam to increase or
decrease locking pressure
2.
Lever
4.
Slot
Positioning the Flow Baffle
The following figures are only recommendations for
use. Adjustments will vary by grass type, moisture
content, and height of grass.
Note:
If the engine power draws down and the mower
ground speed is the same, open up the baffle.
Position A
This is the full rear position. The suggested use for this
position is a follows (Figure 16).
•
Use for short, light grass mowing conditions.
•
Use in dry conditions.
•
For smaller grass clippings.
•
Propels grass clippings farther away from the
mower.
Figure 16
Position B
Use this position when bagging (Figure 17).
19
Summary of Contents for 38696
Page 6: ...Slope Chart 6...
Page 42: ...Schematics Electrical Schematic Rev 42...
Page 43: ...Notes 43...
