Toro 38682, Operator'S Manual

Page: 21 / 40

3. Clean the grease fittings with a rag. Make sure to
scrape any paint off the front of the fitting(s).
4. Connect a grease gun to the fitting. Pump grease
into the fittings until grease begins to ooze out of
the bearings.
5. Wipe up any excess grease.
Lubricating the Caster and
Wheel Bearings
1. Lubricate the front wheel bearings and front spindles
(Figure 15).
2. Lubricate the drive wheel bearings.
Figure 15
Greasing the Transmission
Couplers
Lubricate the transmission couplers located in the back
of the machine (Figure 16).
Figure 16
Greasing the Mower Belt Idler
Grease the fitting on the mower belt idler arm pivot
(Figure 17).
Note:
Remove the mower deck cover to access the
grease fitting for the mower belt idler arm.
Figure 17
21