Fuel Level
Add fuel
To Engage PTO
1. Solve engine fault
2. Let engine warm up
3. Let hydraulic oil warm
4. Lower decks
5. Must be in low range
6. Operator must be seated
To Set High Range
1. Disengage cruise
2. Disengage PTO
3. Lift left deck
4. Lift center deck
5. Lift right deck
6. Reduce ground speed
To Set Low Range
1. Disengage cruise
2. Reduce ground speed
To Start
1. Disengage deck switch
2. Disengage PTO
3. Move traction pedal to neutral
4. Insert jumper in teach plug
5. Engine running
6. Must be seated or set parking brake
7. Turn key switch off then on
8. Wait
For Teach (Traction Pedal Calibration)
Turn key switch off then on
For Traction
1. Fix critical sensor error
2. Fix critical voltage error
3. Move forward
4. Move traction pedal to neutral
5. Release parking brake
6. Operator must be seated
For Traction Assist
1. Must be in low range
2. Operator must be seated
Traction Derate Due To
1. Requires service
2. Engine or hydraulics too hot
3. Traction pedal sensor needs calibration
4. Reserved 1
5. Reserved 2
6. Reserved 3
26
Summary of Contents for 31598
