Toro 31526, Installation Instructions Manual

Page: 11 / 20

Installing the Hydraulic-Pressure
Hose
1. Remove the plug from the end of the
hydraulic-pressure hose that you installed in
step
3 of Removing the Hydraulic Hoses (page
4) .
2. Remove the 45° fitting of the pressure hose from
the straight fitting in the hydraulic pump (
Figure
17 ).
g212927
Figure 17
1. Hydraulic pump 4. 45° hydraulic fitting
2. Straight hydraulic fitting 5. Flow-divider manifold
3. 45° fitting
(hydraulic-pressure hose) 6. Straight fitting
(hydraulic-pressure hose)
3. Align the straight fitting of the hydraulic-pressure
hose with the 45° hydraulic fitting in the
flow-divider manifold (
Figure 18 ).
g212973
Figure 18
1. Straight fitting
(hydraulic-pressure hose) 3. Flow-divider manifold
2. 45° hydraulic fitting
4. Thread the straight fitting of the
hydraulic-pressure hose onto the 45°
hydraulic fitting in the flow-divider manifold
(
Figure 18 ).
5. Align the 45° fitting of the pressure hose with the
straight fitting in the hydraulic pump (
Figure 19 ).
g212962
Figure 19
1. Hydraulic pump 4. Flow-divider manifold
2. Straight hydraulic fitting 5. Jam nut
3. 45° fitting
(hydraulic-pressure hose) 6. 45° hydraulic fitting
6. Thread the 45° fitting of the pressure hose onto
the straight fitting in the hydraulic pump (
Figure
19 ).
7. Tighten the jam nut of the 45° hydraulic fitting
onto the flow-divider manifold (
Figure 19 ).
8. Torque the straight and 45° fittings of the
pressure-hose to 150 to 184 N∙m (110 to 136
ft-lb).
11