Toro 31526, Installation Instructions Manual

Page: 15 / 20

g035966
Figure 28
3. Unlatch the seat and locate the remaining loose
wire harness ends below the back right corner
of the now exposed frame crossbar.
4. Plug the loose harness ends into the 4WD
manifold just inside of the right, front tire (
Figure
29 ).
g035292
Figure 29
6
Completing the Installation
No Parts Required
Checking for Hydraulic Leaks
WARNING
Hydraulic fluid escaping under pressure can
penetrate skin and cause injury.
• Make sure that all hydraulic fluid hoses
and lines are in good condition and all
hydraulic connections and fittings are tight
before applying pressure to the hydraulic
system.
• Keep your body and hands away from
pin hole leaks or nozzles that eject
high-pressure hydraulic fluid.
• Use cardboard or paper to find hydraulic
leaks.
• Safely relieve all pressure in the hydraulic
system before performing any work on the
hydraulic system.
• Get immediate medical help if fluid is
injected into skin.
1. Check and tighten all fittings and hydraulic
connections.
2. Ensure that the hydraulic pump bypass valve is
in the operation position; refer to the pushing or
towing the machine instructions in the
Operator’s
Manual .
3. Check the hydraulic fluid level and replenish it
as required.
4. Connect the positive battery cable to the positive
post of the battery; refer to the
Operator’s
Manual for your machine.
15