Toro 31213, Manual

Page: 6 / 16

g011056
Figure 7
1. Mower deck 4. Bolt (3/8 x 4-1/2
inch) 7. Bushing
2. Bolt (3/8 x 1
inch) 5. Spacer 8. Blower hinge
assembly
3. Locknut (3/8
inch) 6. Anti-scalp roller 9. Drilled holes
5
Routing the Blower Belt
into the Blower Assembly
Parts needed for this procedure:
1 Blower belt
1 Spring
Procedure
1. If present, cut the existing belt cover bracket
so that it is flush with the edge of the top deck
assembly; refer to
Figure 8 .
Note:
Remove any sharp edges.
Note:
Upon removal of this kit, install the new
cover bracket; refer to 10 Installing the New Belt
Cover Bracket Upon Removal of the Kit (page
11)
.
g033986
Figure 8
1. Existing bracket 2. Edge of top deck assembly
(cut existing bracket flush
with this)
2. Install the belt around the blower pulley ( Figure
9 ).
3. Install the spring to the idler arm and the peg on
the blower assembly (
Figure 9 ).
6