Toro 31213, Manual

Page: 10 / 16

8
Installing the Blower
Guards
Parts needed for this procedure:
1 Front guard
1 Back guard
6 Bolt (1/4 x 5/8 inch)
1 Nut (1/4 inch)
Procedure
1. Install the front guard using 3 bolts and a nut
(1/4 inch); refer
Figure 18 .
2. Install the back guard using 3 bolts ( Figure 18 ).
g034078
Figure 18
1. Nut (1/4 inch) 3. Bolt (1/4 x 5/8 inch)
2. Front guard 4. Back guard
9
Installing the Tube Latch
Parts needed for this procedure:
1 Latch bracket assembly
2 Bolt (3/8 x 2-1/2 inches)
2 Nut (3/8 inch)
1 Latch bracket strap
2 Screw (#10 x 1/2 inch)
2 Nut (#10)
Procedure
1. Install the latch bracket assembly onto the
blower with 2 bolts and 2 nuts (
Figure 19 ).
g033958
Figure 19
1. Bolt (3/8 x 2–1/2 inches) 3. Nut (3/8 inch)
2. Latch bracket assembly
2. Attach the latch-bracket strap to the bracket
assembly with 2 screws (#10 x 1/2 inch) and 2
nuts (#10); refer to
Figure 20 .
10