Installing the Spark Plugs
1.
Install the spark plugs and the metal washer. Ensure
that the air gap is set correctly.
2.
Tighten the spark plugs to 16 ft-lb (22 N-m).
3.
Connect the wires to the spark plugs (Figure 31).
Fuel System
Maintenance
Servicing the Fuel Tank
DANGER
In certain conditions, gasoline is extremely
flammable and highly explosive. A fire or explosion
from gasoline can burn you and others and can
damage property.
•
Drain gasoline from the fuel tank when the
engine is cold. Do this outdoors in an open area.
Wipe up any gasoline that spills.
•
Never smoke when draining gasoline, and stay
away from an open flame or where a spark may
ignite the gasoline fumes.
Draining the Fuel Tank
1.
Park the machine on a level surface, to assure fuel tank
drains completely. Then disengage the power take off
(PTO), set the parking brake, and turn the ignition key
to
off
. Remove the key.
2.
Close the fuel shut-off valve at the fuel tank (Figure 32).
3.
Squeeze the ends of the hose clamp together and slide
it up the fuel line away from fuel filter (Figure 32).
4.
Pull the fuel line off the fuel filter (Figure 32). Open
the fuel shut-off valve and allow the gasoline to drain
into a gas can or drain pan.
Note:
Now is the best time to install a new fuel filter
because the fuel tank is empty. Refer to Replacing the
Fuel Filter.
5.
Install the fuel line onto the fuel filter. Slide the hose
clamp close to the valve to secure the fuel line.
Figure 32
1.
Fuel shut-off valve
2.
Clamp
28
Summary of Contents for 30934
Page 49: ...Schematics Electrical Schematic Rev Hydraulic Schematic Rev 49 ...
Page 50: ...Notes 50 ...
Page 51: ...Notes 51 ...
