Figure 4
1. Deflector in lowest position
the grass blades in the 25 mm height-of-cut setting with the rear
of the cutting unit lowered, as this may cause the engine to labor
excessively.
1.
Start the engine and raise the cutting unit so the front-caster
height of cut can be changed. Stop the engine after the cutting
unit is raised. The rear caster height of cut can be changed with
the cutting unit lowered.
2.
Squeeze the back of the wire and rotate wire on the lynch pin.
Pull the pin out of the caster spindle. Slide spacers onto the
caster spindle to get the desired height of cut (Fig. 2 and 3).
Then slide the washer onto the spindle.
3.
Push the caster spindle through the caster arm. Slide any
remaining spacers onto the spindle (Fig. 2 and 3). Install lunch
pin to retain parts in place.
Note: When the cutting unit is used in the 25 mm or 38 mm height-
of-cut setting, the front and rear rollers must be positioned in the
upper bracket holes.
GRASS DEFLECTOR
IMPORTANT: If your traction unit is to be used with a Rear
Discharge Cutting Unit and is not already equipped with the
Donaldson air cleaner, it should be equipped by installing Air
Cleaner Kit 27-7090.
CAUTION: This product may exceed noise levels of 85 dB(A) at
the operator position. Ear protectors are recommended, for pro-
11
The grass deflector is a safety device that diverts grass and other
foreign objects being discharged downward. WE STRONGLY
RECOMMEND THAT THE DEFLECTOR BE IN ITS NORMAL
OPERATING POSITION WHENEVER THE CUTTING UNIT IS
ENGAGED. NEVER OPERATE THE CUTTING UNIT WITH
THE DEFLECTOR REMOVED FROM THE CUTTING UNIT
OR WITH IT ITED/BLOCKED IN A RAISED POSITION. IF
YOU DO, THE BLADES COULD THEN THROW DEBRIS A
CONSIDERABLE DISTANCE WITH SUFFICIENT FORCE TO
CAUSE PERSONAL INJURY OR DAMAGE PROPERTY. If the
grass deflector is damaged, repair or replace the affected parts.
Note: The deflector is spring loaded into its downward normal
operating position but the operator can temporarily swing it out of
the way to facilitate loading in a trailer or other manuevers.
WARNING
Summary of Contents for 30710 Groundsmaster 300
Page 20: ......
